117
Second design：002
② Call the first design 001. There is no problem
although the existing user has already generated a
design. Call the second design 002. Before calling
the second design, user should set the continuous
file opening function.
The setting method is as follows:
Click the edit menu on the screen top. The full-
down menu appears upon the click. Looking at the
bottom of the full-down menu, there is a sub-menu
called File Open Type. Click on the menu, and
then another sub-menu appears. The sub-menu is
composed of OFF and ON. In most of time, when
the function is not applied, OFF is chosen. When
the continuous file opening function is used, user
needs to select ON. By selecting ON, ON is set.
To Next Page
Loading...
