92
··
Overlap Sewing
① Select the first sewing data to be changed.
② Select Overlap Sewing.
③ Overlap Dialog is displayed. It includes one input
box to determine the number of overlap stitches
(default = 4 stitches).
④ Select “OK”, then the sewing data is additionally
overlapped four stitches.
⑤ You cannot that overlapping is successfully exe-
cuted because the stitches are overlapped.
Therefore, the overlapping can be confirmed by
moving the last overlapped stitch. The following
figure shows the overlapped status through
stitch move.
Apply the Overlap function to the selected sewing data.
An overlap sewing function can be applied only to the sewing data created
based on the following configuration data
[closed line, circle, and closed spline]
Reference
To Next Page
Loading...
