SunTech ST4940 - Page 52

Doc. Title
ST4940 User Manual
Concerning:
Rev.
Date (dd-mm-yy)
Page of Pages
Features and how to configure ST4940
1.07
0
1-7-2019
52 of 52
In such a case, the first thing that you have to do is remove the “Alcatel Single RNDIS Interface” from the “Network
Adapters” of the PC.And then, remove the USB Cable from the PC
 Step 3.
You should install ‘USB Driver” on that PC as described inAppendix 10.2.
- The End of the document -