SunTech ST4940 - Emergency Report

Doc. Title
ST4940 User Manual
Concerning:
Rev.
Date (dd-mm-yy)
Page of Pages
Features and how to configure ST4940
1.07
0
1-7-2019
42 of 52
LAT
String
Latitude (+/-xx.xxxxxx).
LON
String
Longitude (+/-xxx.xxxxxx).
SPD
String
Speed in km/h.
This value returns to 0 when it is higher than 200,000km (kilometers).
CRS
String
Course on the ground in degree.
SATT
String
Number of satellites.
FIX
‘1’ or ‘0’
GPS is fixed (1); GPS is not fixed (0).
DIST
String
Traveled distance in meter.
PWR_VOLT
String
Voltage of Battery in percentage (%)
RESERVED
EMPTY
MODE
1 char
‘1’ = Moving Off .
‘2’ = Moving.
MSG_NUM
4 char
Message number.
After “9999” is reported, message number returns to ‘0000”.
RESERVED
EMPTY
RESERVED
EMPTY
MSG_TYPE
1 char
Report is real time (1); Report is storage (0).
<Example>
ST600STT;0123456789;30;309;20160725;06:09:25;024d7424;450;5;2121;23;+37.479330;+126.887846;000.08
1;000.00;6;1;135812;100;;1;3715;;;1
<Notes>
1. In a case that the device has been configured not to check MOTION. In such a case, even though any
motion is not made, the number of DISTANCE may increase little by little. In such a case, life time of the
battery could be extended. If the device is used under operation conditions having a very good
connectivity with GPS and GSM/LTE M1, it can be used approximately 5 days at a reporting interval of
every 3 minutes.
2. If Field of <FIX> has <F>, there is a possibility that the GPS Module would have a problem. In such a
case, users have to contact Suntech.
3. PWR_VOLT : The percentage of the battery voltage are divided as follows:
100%, 90%, 80%, 70%, 60%, 50%, 40%, 30%, 20%, 10%, 5%, 3%, 1%
11-2. Emergency Report
When an emergency occurs, device sends to the server this ‘emergency report’ as defined already in the course of