Doc. Title
ST4940 User Manual
Features and how to configure ST4940
7. How to operate
The ST4940,a multifunctional battery-powered mini GPS tracker, is ideal for tracking personal, valuable assets like
merchandises that are delivered by putting it onto an object.
While tracking, it reports location information about the object at a predefined interval and alerts if it detects motion of
the object. Because it is powered by battery, its user should charge the battery fully prior to using and should turn it off
when tracking is finished.
Users are required to set the reporting timing of the device at an interval with more than 10 minutes in order to save the
endurance time of the battery.
Turn On
If you press POWER button for more than 3 seconds, the device will be turned on.
When the power is on, LEDs blink as below.
Turn Off
If you press the POWER button till all of the LEDs are turned on, the device goes to shutdown.
After the power is turned off, no LED blinks or lightens.
If the charger cable is connected when device is being powered off, device will retain on
charging only mode. and after charger cable is unplugged, device will powered-off completely
To Next Page
Loading...
