6E1-28 ENGINE AND EMISSION CONTROL SYSTEM (G16/J20 ENGINES)
Air Intake System
Throttle body
THROTTLE BODY COMPONENTS
ON-VEHICLE INSPECTION
• Check that throttle valve lever moves smoothly.
REMOVAL
1) Disconnect negative cable at battery.
2) Drain cooling system.
3) Disconnect accelerator cable (1) and/or A/T throttle cable (2)
from throttle body.
4) Remove air cleaner outlet hose.
1. Cable bracket 3. TP sensor 5. O-ring
2. Throttle body 4. Idle air control valve Do not reuse
To Next Page
Loading...
