ENGINE MECHANICAL (J20 ENGINE) 6A4-63
Pistons, Piston Rings, Connecting Rods and Cylinders
COMPONENTS
1. Top ring 7. Connecting rod bearing
: Do not apply engine oil between rod big
end and bearing, between cap and bearing.
13. Connecting rod bearing cap nut
2. 2nd ring 8. Piston pin 14. Oil pump bolt
3. Oil ring 9. Piston pin circlip 15. Oil pump sprocket cover bolt
4. Piston 10. Cylinder block Tightening torque
5. Connecting rod
: Do not apply engine oil to inner surface of rod
big end.
11. Oil pump Do not reuse.
6. Connecting rod bearing cap
: Do not apply engine oil to inner surface of
cap.
12. Oil pump sprocket cover Apply engine oil to sliding surface
of each part.
To Next Page
Loading...
