ENGINE AND EMISSION CONTROL SYSTEM (G16/J20 ENGINES) 6E1-55
A/C compressor relay and condenser fan motor relay
(other than canvas top model)
INSPECTION
1) Disconnect negative (–) cable at battery.
2) Remove A/C compressor relay (1) or A/C condenser fan
motor relay (2) from fuse/relay box (3).
3) Structure of A/C compressor relay or A/C condenser relay is
the same as that of main relay.
Check its resistance and operation using the same proce-
dure as that for main relay.
If malfunction is found, replace.
3
1
2
To Next Page
Loading...
