6-88 ENGINE GENERAL INFORMATION AND DIAGNOSIS (G16/J20 ENGINES)
DTC P0335 Crankshaft Position Sensor Circuit Malfunction
WIRING DIAGRAM
REFERENCE
Connect oscilloscope between terminals C51-2-19 (+) and C51-2-20 (–) of ECM (PCM) connector connected to
ECM (PCM) and check CKP sensor signal.
Oscilloscope Waveforms
[A] : G16 Engine 1. CKP sensor 3. Sensor plate on crankshaft
[B] : J20 Engine 2. Crankshaft timing belt pulley 4. ECM (PCM)
[A] : G16 Engine
[B] : J20 Engine
To Next Page
Loading...
