Suzuki GSX1300BK B-King - Tightening Torque Specifications; Special Tools and Equipment; Recommended Service Material; Special Tool

Engine Cooling System: 1F-19
Tightening Torque Specifications
B823H11607002
NOTE
The specified tightening torque is also described in the following.
“Water Hose Routing Diagram (Page 1F-3)”
“Water pump Components (Page 1F-12)”
“Water Pump Construction (Page 1F-13)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List in Section 0C
(Page 0C-9)”.
Special Tools and Equipment
Recommended Service Material
B823H11608001
NOTE
Required service material is also described in the following.
“Water pump Components (Page 1F-12)”
“Water Pump Construction (Page 1F-13)”
Special Tool
B823H11608002
Fastening part
Tightening torque
Note
Nmkgf-mlb-ft
Thermostat cover bolt 10 1.0 7.0 )(Page 1F-11)
Water pump mounting bolt 10 1.0 7.0 )(Page 1F-14)
Impeller securing bolt 8 0.8 6.0 )(Page 1F-16)
Water pump case screw 6 0.6 4.5 )(Page 1F-17)
Material SUZUKI recommended product or Specification Note
Grease SUZUKI SUPER GREASE A or
equivalent
P/No.: 99000–25010 )(Page 1F-14) /
)(Page 1F-15) /
)(Page 1F-17)
Moly paste SUZUKI MOLY PASTE or equivalent P/No.: 99000–25140 )(Page 1F-16)
09900–25008 09913–70210
Multi-circuit tester set Bearing installer set
)(Page 1F-10) )(Page 1F-15)
09921–20240
Bearing remover set
)(Page 1F-15)