Suzuki GSX1300BK B-King - Fuel Tank Heat Shield Construction

1G-9 Fuel System:
Fuel Tank Heat Shield Construction
B823H11706017
1. Fuel tank cushion
: Clean the adhesive surface and then apply an adhesive agent.
6. Fuel tank cover guide
2. Dent mark
: Align the fuel tank cushion with the dent mark (2).
7. Fuel tank cover cushion
3. Fuel tank cover cushion
: Clean the adhesive surface and then apply an adhesive agent.
“a”: 0 – 5 mm (0 – 0.2 in)
4. Velcro fastening
: Clean the adhesive surface of the velcro fastening and align the verclo fastening to the aligning mark.
:11 Nm (1.1 kgf-m, 8.0 lb-ft)
5. Slide clip : 13 Nm (1.3 kgf-m, 9.5 lb-ft)
“B”
“A”
I823H1170031-01
“A”: The end of the clamp should face forward. “B”: Hitch the heat shield to the tab of the fuel tank.