9C-6 Combination Meter / Fuel Meter / Horn:
NOTE
It takes approx. 30 seconds that the fuel level
indicator indicates the detected fuel level.
6) Connect the fuel level gauge coupler and reinstall
the fuel tank.
Refer to “Fuel Tank Removal and Installation in
Section 1G (Page 1G-10)”.
Fuel Level Gauge Inspection
B823H19306009
Inspect the fuel level gauge in the following procedures:
1) Remove the fuel level gauge. Refer to “Fuel Pump
Disassembly and Assembly in Section 1G (Page 1G-
13)”.
2) Measure the resistance at each fuel level gauge in
float position. If the resistance is incorrect, replace
fuel level gauge with a new one.
Special tool
: 09900–25008 (Multi-circuit tester set)
Tester knob indication
Resistance (:)
3) Install the fuel level gauge. Refer to “Fuel Pump
Disassembly and Assembly in Section 1G (Page 1G-
13)”.
Flicker
Flicker
ON
ON
ON
Flicker
Resistance
75.2 ± 4.5 Ω –
104 ± 4.7 Ω
60.5 ± 4.3 Ω –
75.2 ± 4.5 Ω
42.3 ± 4.0 Ω –
60.5 ± 4.3 Ω
25.8 ± 3.7 Ω –
42.3 ± 4.0 Ω
15.0 ± 3.2 Ω –
25.8 ± 3.7 Ω
104 ± 4.7 Ω
and more
Fuel level indicator
ON
I823H1930011-09
Float position Resistance
Full “a” Approx. 3 :
Empty “b” Approx. 120 :
“a”: 241.2 mm (9.50 in) “b”: 55 mm (2.17 in)
“a”
“b”
I823H1930012-02
To Next Page
Loading...
