Suzuki GSX1300BK B-King - Specifications; Service Data; Tightening Torque Specifications; Special Tools and Equipment

Wiring Systems: 9A-10
Specifications
Service Data
B823H19107001
Electrical
Tightening Torque Specifications
B823H19107002
NOTE
The specified tightening torque is also described in the following.
“Wiring Harness Routing Diagram (Page 9A-5)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List in Section 0C
(Page 0C-9)”.
Special Tools and Equipment
Recommended Service Material
B823H19108001
NOTE
Required service material is also described in the following.
“Wiring Harness Routing Diagram (Page 9A-5)”
1. CMP sensor : 14 Nm (1.4 kgf-m, 10.0 lb-ft) “a”: Approx. 45q
2. Oil pressure switch : 5 Nm (0.5 kgf-m, 3.5 lb-ft) “b”: Within 20q
3. Engine ground lead wire : 6 Nm (0.6 kgf-m, 4.3 lb-ft) “c”: Within 10q
4. CKP sensor : 6.5 Nm (0.65 kgf-m, 4.7 lb-ft) : Apply bond to the thread part.
“A”: When tightening the starter motor mounting
bolts, tighten rear one first.
:11 Nm (1.1 kgf-m, 8.0 lb-ft)
:10 Nm (1.0 kgf-m, 4.7 lb-ft) : 120 Nm (12 kgf-m, 87 lb-ft)
Item Specification Note
Fuse size
Headlight
HI 10 A
LO 10 A
Signal 10 A
Ignition 10 A
Fuel 10 A
Fan (LH)
15 A
Fan (RH)
Main 30 A