Suzuki GSX1300BK B-King - Wiring Harness Routing Diagram

9A-5 Wiring Systems:
Wiring Harness Routing Diagram
B823H19102005
1
2
3
5
6
“A”
6
7
8
6
“C”
9
“B”
4
I823H1910904-04
1. Wiring harness protector
: Stick the wiring harness protector onto the seat rail bolt.
7. Starter motor lead wire
2. Clamp
: Bind the wiring harness, oil pressure switch lead wire and HO2 sensor lead
wire with the clamp.
8. Battery (–) lead wire
3. Clamp
: Bind the wiring harness and rear brake light switch lead wire with the
clamp.
9. CMP sensor
4. Clamp
: Bind the wiring harness and ISC valve lead wire with rib of the throttle body
at white taping point.
“A”: Set the clamp between the headlight and headlight housing.
5. Wiring harness No. 2 “B”: Turn the coupler side of the #1 ignition coil/plug cap to the left.
6. Fixed clamp “C”: Rout the CMP sensor lead wire above the wiring harness.