Ignition System: 1H-7
• Install the ignition coil/plug caps and connect their
lead wire couplers.
CAUTION
!
Do not hit the ignition coil/plug cap with a
plastic hammer when installing it.
NOTE
The coupler of #1 ignition coil/plug cap faces
left side.
Spark Plug Inspection and Cleaning
B823H11806002
Refer to “Spark Plug Inspection and Cleaning in Section
0B (Page 0B-9)”.
Ignition Coil / Plug Cap Inspection
B823H11806003
Refer to “Electrical Components Location in Section 0A
(Page 0A-7)”.
Ignition Coil Primary Peak Voltage
1) Remove the air cleaner box. Refer to “Air Cleaner
Box Removal and Installation in Section 1D
(Page 1D-6)”.
2) Disconnect all ignition coil/plug caps. Refer to
“Ignition Coil / Plug Cap and Spark Plug Removal
and Installation (Page 1H-6)”.
3) Connect the new spark plugs to each ignition coil/
spark plug cap.
INCORRECT
I718H1180012-01
I823H1180010-03
I823H1180031-02
To Next Page
Loading...
