FUEL SYSTEM 4-13
GASKET
• Install the gasket
1.
!
PISTON VALVE AND SPRING
• Install the piston valve
1 and spring
2 to the throttle cable.
• Apply SUZUKI SUPER GREASE “A” to the O-ring
1.
" 99000-25010: SUZUKI SUPER GREASE “A”
(or equivalent)
#
• Install the gasket
2.
#
• Install the piston valve
3 to the carburetor.
#
The removed gasket must be replaced with a new one
to prevent fuel leakage.
The removed O-ring must be replaced with a new one.
The removed gasket must be replaced with a new one.
Align the slit
A of the piston valve
3 with the projec-
tion
B on the carburetor body.
To Next Page
Loading...
