Suzuki LT-Z90K7 2007 - Page 135

4-14 FUEL SYSTEM
• Install the carburetor top cap
4
.
• Install the intake pipe clamp
5
.
• Tighten the carburetor mounting bolts
6
to the specified
torque.
" Carburetor mounting bolt: 6 N·m (0.6 kgf-m, 4.5 lb-ft)
• Install the fuel hose
7
.
• Install the air vent hose
8
.
• Install the vacuum hose
9
.
NOTE:
Do not squall each hose.
• After installing the carburetor, perform the following:
* Inspect fuel leakage.
* Engine idle r/min adjustment.....................

2-13
* Throttle cable play adjustment ..................

2-13