3-10 ENGINE
• Align the engraved line
3
on the camshaft so it is parallel with
the mating surface of the cylinder head.
• Remove the cam chain tension adjuster plug cap
4
.
• Insert the
-
screwdriver into the slotted end of cam chain ten-
sion adjuster and turn the adjusting screw clockwise with the
-
screwdriver until the push rod locked.
• Remove the cam tension adjuster
5
and gasket
6
.
• Remove the cam sprocket
7
.
• Remove the cylinder head nut
8
.
To Next Page
Loading...
