Suzuki LT-Z90K7 2007 - Page 90

3-46 ENGINE
• Remove the bearings with the special tool.
\ 09913-20240: Bearing remover set
9: ¬12
0: ¬17
A: ¬20
INSTALLATION
• Apply SUZUKI BOND “1215” to the rear axle housing.
E 99000-31110: SUZUKI BOND “1215”
(or equivalent bond)
• Tighten the rear axle housing bolts to the specified torque.
" Rear axle housing bolt: 60 N·m (6.0 kgf-m, 43.5 lb-ft)
• Install the bearing with the special tool.
\ 09913-70210: Bearing installer set
1: ¬25

\ 09913-70210: Bearing installer set
2: ¬17
3: ¬20
The removed bearings must be replaced with new
ones.