Suzuki LT-Z90K7 2007 - Page 91

ENGINE 3-47
\ 09913-70210: Bearing installer set
4, 5: ¬25
6: ¬20

• Install the rear axle housing washer
7
.
• Install the snap ring
8
.
• Install the oil seals with the special tool.
\ 09913-70210: Bearing installer set (¬47)

\ 09913-70210: Bearing installer set (¬30)

The removed bearings must be replaced with new
ones.
The removed oil seal must be replaced with a new one.
The removed oil seal must be replaced with a new one.