ENGINE 3-51
MOVABLE DRIVE FACE DISASSEMBLY
• Remove the movable drive face plate
1
and dampers
2
.
• Remove the rollers
3
.
SPACER INSPECTION
Inspect the movable drive spacer
1
and power reduction spacer
2
for wear or damage.
If they are worn or damaged, replace them with new ones.
MOVABLE AND FIXED DRIVE FACE INSPECTION
Inspect the movable drive face for any abnormal condition such
as stepped wear or discoloration caused by burning.
If any defects are found, replace them with new ones.
ROLLER INSPECTION
Inspect each roller and their sliding surface for wear or damage.
If any defects are found, replace the rollers as a set.
NOTE:
The rollers must always be changed as a set.
To Next Page
Loading...
