DISASSEMBLY AND ASSEMBLY 4-45
THROTTLE BODY
REMOVAL
• Remove the seat and radiator covers. (4-2)
• Remove the fuel tank. (4-2)
NOTE:
Be sure to follow the NOTICE in fuel tank section when remov-
ing the fuel tank.
• Disconnect the TP sensor coupler 1 and condenser coupler
2.
• Remove the condenser 3.
• Disconnect the hot starter cable 4 from the throttle body.
• Loosen the throttle body clamp screws 5.
• Move the air cleaner backward.
• Move the throttle body assembly left side.
• Disconnect the IAP sensor coupler 6 and fuel injector cou-
pler 7.
To Next Page
Loading...
