PERIODIC MAINTENANCE 2-17
INSPECTION
• Check the oil strainers for any damage or clogging.
• If the oil strainer is clogging, clean the oil strainer with a com-
pressed air.
A Oil strainer No.1
B Oil strainer No.2
• Clean the oil nozzle by applying compressed air.
OIL STRAINER (No.2) INSTALLATION
• Install the oil strainer No.2 1 and tighten the oil strainer No.2
bolts 2 to the specified torque.
Oil strainer No.2 bolt: 5.5 N·m (0.55 kgf-m, 4.0 lbf-ft)
• Install the oil pump No.2 cover 3 and tighten the oil pump
No.2 bolts 4 to the specified torque.
Oil pump No.2 bolt: 11 N·m (1.1 kgf-m, 8.0 lbf-ft)
• Install the magneto cover. (4-53)
• Install the gearshift lever.
INSPECTION AFTER INSTALLATION
• Engine oil level and oil leakage (2-13)
To Next Page
Loading...
