Suzuki RM-Z250 - Swingarm; Removal

4-102 DISASSEMBLY AND ASSEMBLY
SWINGARM
REMOVAL
• Place the motorcycle on a block to lift rear wheel off the
ground.
• Remove the rear wheel. (4-57)
• Remove the chain guide bolts and nuts 1.
• Remove the chain guide plate 2 and chain guide 3.
• Remove the rear master cylinder mounting bolts 4 and brake
hose guide screw 5.
• Remove the rear brake caliper assembly 6 from the swing-
arm.
• Remove the cushion rod bolt and nut 7.
• Remove the cushion lever bolt and nut 8.
• Remove the swingarm pivot nut 9 and washer 0.