Suzuki RM-Z250 - Inspection before Engine Oil Level Check

2-12 PERIODIC MAINTENANCE
INSPECTION BEFORE ENGINE OIL LEVEL CHECK
• Before starting the engine, check that there is sufficient oil for
operating the engine.
• Remove the oil check bolt 1.
• Tilt the motorcycle to the right and check that engine oil
comes out from oil level check hole.
• Tighten the oil check bolt 1.
 Oil check bolt: 11 N·m (1.1 kgf-m, 8.0 lbf-ft)
NOTICE
If the engine is started with insufficient or no oil, the
engine components will possibly be damaged.
Always keep the engine oil at the specified level.