DISASSEMBLY AND ASSEMBLY 4-49
ENGINE COOLANT
REPLACEMENT
• Open the radiator cap 1.
• Remove the engine coolant drain bolt 2 and drain engine
coolant.
• Install the gasket washer and tighten the engine coolant drain
bolt 2 to the specified torque.
NOTE:
Replace the gasket washer with a new one.
Engine coolant drain bolt: 11 N·m (1.1 kgf-m, 8.0 lbf-ft)
• Loosen the air bleeder bolt 3.
• Pour specified engine coolant up to the bottom of filler hole.
(2-19)
Engine coolant capacity: 950 ml (1.0/0.8 US/Imp qt)
WARNING
Engine coolant may be harmful if swallowed or if it
comes in contact with the skin or eyes. If engine cool-
ant gets into the eyes or contacts the skin, flush the
eyes or wash the skin thoroughly, with plenty of water.
If engine coolant is swallowed, induce vomiting and
call a physician immediately.
Do not open the radiator cap when the engine is hot,
as you may be injured by escaping hot liquid or vapor.
To Next Page
Loading...
