Suzuki RM-Z250 - Front and Rear Wheels; Front Wheel

4-54 DISASSEMBLY AND ASSEMBLY
FRONT AND REAR WHEELS
FRONT WHEEL
REMOVAL
• Remove the front axle nut 1.
• Loosen the left axle holder bolts 2.
• Place the motorcycle on a block to lift front wheel off the
ground.
• Loosen the right axle holder bolts 3.
• Remove the front axle 4.
• Remove the front wheel.
INSPECTION
Spacer and Dust Seal
• Remove the wheel spacers from the front wheel.
• Inspect the right and left wheel spacers 1 and dust seals 2
for wear and cracks.
• If any defects are found, replace the spacer 1 together with
the dust seal 2.
NOTE:
Apply grease to the spacers 1 and dust seals 2 before reas-
sembling.