DISASSEMBLY AND ASSEMBLY 4-53
• Install the dowel pins 3 and gasket 4.
NOTE:
Replace the gasket 4 with a new one.
• Install the magneto cover 5.
• Tighten the magneto cover bolts (A,B,C) to the specified
torque.
NOTE:
* The bolts A are 5 mm longer than the others.
* Fit the clutch cable bracket to the bolt B.
Magneto cover bolt: 11 N·m (1.1 kgf-m, 8.0 lbf-ft)
• Install the gearshift lever.
• Pour engine oil. (2-14)
To Next Page
Loading...
