Suzuki RM-Z250 - Self-Diagnosis Function

SERVICING INFORMATION 5-11
1 Throttle cable (Pulling cable) 5 Wiring harness
2 Throttle cable (Returning cable) a 2 – 3 mm (0.08 – 0.12 in)
3 Hot starter cable b 0 – 1.5 mm (0 – 0.06 in)
4 Radiator overflow hose
*2
*5
*6
*4
*4
*1
*3
*1 Pass the throttle cables over the radiator and radiator overflow hose.
*2
Pass the hot starter cable between the radiator and frame. Pass the hot starter cable under the radiator overflow
hose.
*3 Pass the hot starter cable over the radiator hose.
*4 Bind the throttle cables and wiring harness with the clamp.
*5 Bind the hot starter cable and wiring harness with the clamp.
*6 Pass the throttle cables inside of the frame bridge.