Suzuki RM-Z250 - Page 94

4-14 DISASSEMBLY AND ASSEMBLY
• Remove the cam chain tension adjuster cap bolt 5, gasket
6, bar 7 and spring 8.
• Remove the cam chain tension adjuster 0 by removing their
bolts 9.
• Remove the camshaft journal holder A.
NOTE:
Be sure to loosen the camshaft journal holder bolts evenly by
shifting the wrench in the descending order of numbers.
NOTE:
The descending order of numbers are indicated on the camshaft
journal holder.
• Disengage the camshafts C from cam chain B.
• Remove the dowel pins D and C-rings E.
NOTE:
Do not drop the cam chain B, dowel pins D and C-rings E into
the crankcase.
7
7
4
4
5
5
1
1
2
2
6
6
3
3
8
8