Swan Analytical Instruments AMI - Page 56

54 A-96.250.661 / 120418
AMI Sample Sequencer
Error List
Error Description Corrective action
E009 Sample Flow high
– check Inlet pressure
– readjust sample flow
– check programmed value, see 5.2.1, p.
61
E010 Sample Flow low
– check Inlet pressure
– readjust sample flow
– clean instrument
– check programmed value, see 5.2.2, p.
61
E031 Calibration Recout
– call service
E049 Power-on
– none, normal status
E050 Power-down
– none, normal status