Symantec NetBackup - Managing OpenStorage data movers

To delete OpenStorage server credentials of a data mover
1
In the NetBackup Administration Console, expand Media and Device
Management > Credentials > Storage Server.
2
Select the storage server, then select Edit > Change.
3
Select the Media Servers tab.
4
Select the media server for which you want to delete the credentials.
5
Click Remove and then click OK.
Determining if OpenStorage server credentials exist
You can determine which media servers have credentials configured for the atorage
server.
To determine if the storage server credentials are configured already
1
In the NetBackup Administration Console, expand Media and Device
Management > Credentials > Storage Server.
2
Select the storage server, then select Edit > Change.
3
Select the Media Servers tab.
The media servers for which credentials are configured are identified in the
Media Servers Status column.
Managing OpenStorage data movers
In OpenStorage, NetBackup media servers function as the data movers. A data
mover is an entity that moves data between the primary storage (the NetBackup
client) and the storage server.
For an existing OpenStorage environment in NetBackup, you can do the following:
■ Add a media server as a data mover.
See “Adding an OpenStorage data mover” on page 111.
To add an OpenStorage data mover, see the procedure later in this section.
■ Retire a media server as a data mover.
See “Retiring an OpenStorage data mover” on page 112.
See “About OpenStorage data movers” on page 62.
Adding an OpenStorage data mover
Use the following process to add an OpenStorage data mover.
111Managing OpenStorage
Managing OpenStorage data movers