Symantec NetBackup - Licensing AdvancedDisk

Licensing AdvancedDisk
No special installation is required for the NetBackup components of AdvancedDisk.
However, you must enter a license key. If you installed the license key when you
installed or upgraded NetBackup, you do not need to perform this procedure.
Enter the license key on the NetBackup master server. The following procedure
describes how to use the NetBackup Administration Console to enter the license
key.
To license AdvancedDisk
1
To add a license to a specific server, select File > Change Server and then
select the server.
2
In the NetBackup License Keys dialog box, click New.
3
In the Add a New License Key dialog box, enter the license key and click Add
or OK.
4
Click Close.
5
Restart all the NetBackup services and daemons.
Licensing AdvancedDisk
Licensing AdvancedDisk
20