See “Changing AdvancedDisk disk pool state” on page 42.
See “Changing AdvancedDisk disk volume state” on page 43.
See “Deleting an AdvancedDisk disk pool” on page 43.
See “Determining AdvancedDisk disk pool state” on page 44.
See “Determining AdvancedDisk disk volume state” on page 44.
See “Merging AdvancedDisk disk pools” on page 45.
See “Removing a volume from an AdvancedDisk disk pool” on page 45.
See “Viewing AdvancedDisk disk pools” on page 46.
Adding volumes to an AdvancedDisk disk pool
You can expand a disk pool’s capacity by adding disk volumes to the disk pool.
The names of the new volumes must differ from the names of the volumes in the
current disk pool.
The NetBackup storage units that use the disk pool use the additional storage
capacity automatically. You do not have to change the storage units.
(By default, NetBackup automatically increases disk pool capacity if the capacity
of the underlying disk volumes increases. Similarly, NetBackup decreases the
capacity of a disk pool if the underlying disk volume capacity decreases.)
Table 5-1
Add volumes process for an AdvancedDisk disk pool
ProcedureTask
See “Configuring an AdvancedDisk disk pool”
on page 29.
Create a disk pool from the new
disk volumes on the storage
server.
When you merge the disk pools, specify the original
disk pool as the primary one. NetBackup deletes the
secondary disk pool after the merge.
See “Merging AdvancedDisk disk pools” on page 45.
Merge the disk pools.
Changing AdvancedDisk disk pool properties
You can change the properties of a disk pool.
To add volumes to a disk pool, you must use a different procedure.
See “Adding volumes to an AdvancedDisk disk pool” on page 41.
41Managing AdvancedDisk
Managing AdvancedDisk disk pools
To Next Page
Loading...
