Symantec NetBackup - Monitoring Openstorage Storage Capacity and Usage; Viewing Openstorage Disk Pools

To update an OpenStorage disk pool in NetBackup
◆
Run the following command on the master server:
nbdevconfig -changedp -dp disk_pool_name -stype server_type
-setattribute attribute
The following is the path to the nbdevconfig command:
■ UNIX: /usr/openv/netbackup/bin/admincmd
■ Windows: install_path\NetBackup\bin\admincmd
See the following descriptions of the options that require arguments:
The name of the disk pool.-changedp
disk_pool_name
The storage vendor provides the string that identifies
the server type.
-stype server_type
The attribute is the name of the argument that represents
the new functionality.
For example, OptimizedImage specifies that the
environment supports the optimized synthetic backup.
SpanImages specifies that backup images can span
across volumes on the disk appliance.
-setattribute
attribute
Viewing OpenStorage disk pools
Use the NetBackup Administration Console to view configured disk pools.
To view disk pools
◆
In the NetBackup Administration Console, in the left pane, expand Media
and Device Management > Devices > Disk Pools.
Monitoring OpenStorage storage capacity and usage
To monitor storage capacity and usage, see the following:
The Disk Pools window displays a value that was stored when NetBackup polled the disk
pools. The value may not be as current as the value that is displayed in the StorageServer
window.
To display the window, in the NetBackupAdministrationConsole, in the left pane, select
Media and Device Management > Devices > Disk Pools.
The NetBackup
Administration Console
Disk Pools window.
Managing OpenStorage
Monitoring OpenStorage storage capacity and usage
120