The encryption version.CRYPT_VERSION
A switch to set the logging level of the encryption activities. The value is either YES
for logging or NO for no logging.
CRYPT_LOG_VERBOSE
Configuring Nirvanix data mover preferences
When you configure a storage server for Nirvanix cloud storage, NetBackup creates
the following files on the media server that queries the storage server:
■ libstspinirvanix.conf
■ libstspinirvanix.pref
■ libstspiencrypt.conf (only if your storage server type is nirvanix_e)
You must copy these files to any additional media servers that you configured as
data movers.
To configure Nirvanix data mover preferences
◆
For each data mover media server, copy the aforementioned files to the
following directory (depending on operating system):
UNIX: /usr/openv/lib/ost-plugins
Windows: install_path/NetBackup/bin/ost-plugins
Configuring an OpenStorage disk pool
When you create a disk pool, you specify the following:
■ The storage server.
For OpenStorage, the disk appliance is the storage server.
■ The disk volume or volumess to include in the pool.
■ The disk pool properties.
See “OpenStorage disk pool properties” on page 90.
Symantec recommends that disk volume and disk pool names be unique across
your enterprise.
See “Configuring an OpenStorage storage server” on page 85.
89Configuring OpenStorage
Configuring Nirvanix data mover preferences
To Next Page
Loading...
