Table 18-1
Device Monitor information (continued)
InformationAction
For a shared drive, the Change Drive Comment dialog box
contains the following:
■ A list of all paths to the selected drive
■ The current drive comment for each combination.
You can choose any number of paths to which the changes
apply.
Adding or changing a
comment for a shared drive
The three available drive cleaning functions are used with
shared drives are as follows:
■ Clean Now
In the list of hosts that share the drive, you can choose
only one host on which the function applies.
■ Reset Mount Time
In the list of hosts that share the drive, you can choose
any number of hosts on which the function applies.
■ Set Cleaning Frequency
Supported for shared drives.
Performing drive cleaning
functions for a shared drive
Viewing SSO summary reports
You can view Shared Storage Option Summary reports.
See “Shared Storage Option summary reports” on page 161.
To view SSO summary reports
1
In the NetBackup Administration Console, in the left pane, expand Media
and Device Management > Device Monitor.
2
On the Actions menu, select View Status of Shared Drives.
3
In the Status of Shared Drives dialog box, select a device allocation host (or
hosts) from the list.
4
Use Add to move the host to the list of hosts to scan.
5
Click OK.
The Shared Drive Summary and Device Allocation Host Summary appear
in the two lower panes of the dialog.
Using the Shared Storage Option
Viewing SSO summary reports
160
To Next Page
Loading...
