Symantec NetBackup - Advanceddisk Storage Unit Properties

To configure a storage unit from the Actions menu
1
In the NetBackup AdministrationConsole, in the left pane, select NetBackup
Management > Storage > Storage Units.
2
Click Actions > New > Storage Unit.
3
Complete the fields and set the options in the New Storage Unit dialog box.
See “AdvancedDisk storage unit properties” on page 33.
4
Click OK.
AdvancedDisk storage unit properties
The following are the configuration options for a disk pool storage unit.
33Configuring AdvancedDisk
Configuring an AdvancedDisk storage unit