Product Rev: "2561"
Serial Number: "PXA37S3261"
WWN : ""
WWN Id Type : 0
Device Identifier: ""
Device Type : SDT_TAPE
NetBackup Drive Type: 9
Removable : Yes
Device Supports: SCSI-2
Flags : 0x4
Reason: 0x0
------------------------------------------------------------
Device Name : "/dev/st/nh3c0t1l0"
Passthru Name: "/dev/sg/h3c0t1l0"
Volume Header: ""
Port: -1; Bus: -1; Target: -1; LUN: -1
Inquiry : "QUANTUM DLT7000 296B"
Vendor ID : "QUANTUM "
Product ID : "DLT7000 "
Product Rev: "296B"
Serial Number: "PXA50S2276"
WWN : ""
WWN Id Type : 0
Device Identifier: ""
Device Type : SDT_TAPE
NetBackup Drive Type: 9
Removable : Yes
Device Supports: SCSI-2
Flags : 0x4
Reason: 0x0
3
For each tape drive in the tpconfig output, do the following:
■ Use the device file name from the tpconfig output to locate the tape drive
in the scan output.
Step 1 shows device file pathnames /dev/st/nh3c0t5l0 and
/dev/st/nh3c0t1l0.
■ Determine the serial number of the drive in the scan output. "Tape" in the
device type field identifies a tape drive.
Step 2 shows example scan output shows the following:
The drive /dev/st/nh3c0t5l0 serial number is PXA37S3261.
The drive /dev/st/nh3c0t1l0 serial number is PXA50S2276.
157Configuring the Shared Storage Option
Verifying your Shared Storage Option configuration