Table 8-3
NDMP requirements for OpenStorage direct to tape (continued)
DescriptionNDMP functionality
The NDMP FSE server must use the same credentials as the OpenStorage storage server.
If you use the NDMP FSE server for other purposes, do not configure the credentials
differently for that purpose. For example, if you also use the NDMP FSE server as a VTL
with NetBackup, use the same credentials when you configure it with NetBackup.
Credentials
Figure 8-2
OpenStorage server provides all NDMP functionality
Tape library directly
attached to the
OpenStorage server
The disk appliance
provides both the NDMP
FSE and NDMP tape
server functionality
Network
Figure 8-3
Tape library with embedded NDMP tape server host
Tape library with embedded
NDMP tape server host
Network
The disk appliance provides
the NDMP FSE
69Planning your deployment
About OpenStorage direct to tape
To Next Page
Loading...
