Symmetricom TimeProvider 1000 Reference Guide

Appendix B Alarms
144 TimeProvider TL1 Reference Guide 097-58001-01 Revision E – September 2006
IOC2EQPT
IOC2EQPT indicates that
the IOC was physically
inserted or removed from
the system.
EQPT NSA IMMED NO MJ MJ MJ
EXPNEQPT
The Expansion Panel
was physically inserted or
removed from the
system.
EQPTNSA IMMEDNO MJMJMJ
<aid> = IMC
IOC1COMM A communication alarm
with either of the IOC1
modules.
EQPTNSA IMMEDNO MNMNMN
IOC2COMM A communication alarm
with either of the IOC2
modules.
EQPTNSA IMMEDNO MNMNMN
IMCFAIL A summary alarm of
IMC BIST faults
EQPT SA IMMED NO MJ MJ MJ
IMCTCPIP TCP/IP activity is
excessive; a DoS attack
could be in progress
EQPT SA IMMED NO MN MN MN
<aid> = IOC1
IMC1COMM A communication alarm
with the IMC module
and IOC1 module.
EQPTNSA IMMEDNO MNMNMN
IOC1TO2
COMM
A communication alarm
from IOC1 module to
IOC2 module.
EQPTNSA IMMEDNO MNMNMN
IOCFAIL
A summary alarm for
failures of the IOC
hardware that are not
specified in other alarms.
EQPT SA IMMED NO MJ MJ MJ
BTBCKUP All BesTime Backup
sources, inputs are
unusable to the
BesTime engine.
EQPT NSA IMMED NO NA NA NA
CLKBRDG The local oscillator on
the specified IOC is in
Bridging Mode.
EQPT NSA IMMED NO NA NA NA
Table B-1. Alarms (Continued)
Alarm ID
or
CONDTYPE
Alarm Condition
Description
AID
Type
Service
Affecting
Error
Delay
Default
Error
Delay
Editable
Alarm Default
Level
SSU PRS SUB

Symmetricom TimeProvider 1000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 1000
Category	Clock
Language	English