EasyManuals Logo

Symmetricom TM7000 User Manual

Symmetricom TM7000
174 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
GENERAL DESCRIPTION
Aging Rate
±1.0PPM maximum per year.
Temperature Range and Stability
±1.0PPM from -30
o
to +75
o
C. (Note: This temperature range applies only to the
crystal. The TCG/T is rated at 0
o
to +50
o
C.)
The following specifications are for the 10MHz sine wave output (2.8 volts peak-
to-peak terminated into 50Ω) available on rear panel BNC connector J5:
Phase Noise
1Hz -61 dBc/Hz
10Hz -78 dBc/Hz
100 Hz -97 dBc/Hz
1KHz -116 dBc/Hz
10KHz -124 dBc/Hz
100 KHz -133 dBc/Hz
Harmonics
-10dBc max.
Spurious Noise
>-66dBc
B. LOW NOISE OVEN OSCILLATOR with the following specifications:
Output Frequency/Waveform
10MHz Sine Wave.
Aging Rate
±5 x 10
-10
per day, ±5 x 10
-8
per year.
Temperature Stability
±1 x 10
-8
over a temperature range of –20ºC to +75ºC. (Note: This temperature
range applies only to the crystal. The TCG/T is rated at 0
o
to +50
o
C.)
Mechanical Frequency Adjust
±1PPM (minimum) / ±3PPM (maximum).
The following specifications are for the 10MHz sine wave output (2.8 volts peak-
to-peak terminated into 50Ω) available on rear panel BNC connector J5:
Symmetricom, Inc. TM7000 TymMachine TCG/T (Rev D) 1-11

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Symmetricom TM7000 and is the answer not in the manual?

Symmetricom TM7000 Specifications

General IconGeneral
BrandSymmetricom
ModelTM7000
CategoryElectronic dictionary
LanguageEnglish