Synrad Firestar f series User Manual

technical reference
333
Synrad Firestar f-Series operator’s manual
f201 general specications
Parameter Firestar f201
Cooling Specications
Maximum Heat Load ............................................4000 Watts (13.7 kBtu/hr)
Flow Rate (minimum) .........................................2.0 GPM at < 60 PSI (7.6 lpm at < 414 kPa)
(recommended) ................................2.5 GPM at < 60 PSI (9.5 lpm at < 414 kPa)
Pressure Drop ..........................................................1 PSI at 2 GPM (6.9 kPa at 7.6 lpm)
Coolant Temperature
8
..........................................18 °C to 22 °C
Environmental Specications
Operating Temperature
9
.....................................15 °C to 40 °C
Humidity ...................................................................0–95%, non-condensing
Physical Specications
Length .......................................................................48.4 in (122.9 cm)
Width .........................................................................11.0 in (27.9 cm)
Height ........................................................................6.48 in (16.5 cm)
Weight .......................................................................96 lbs (43.5 kg)
* Specications subject to change without notice.
8 Firestar f201 lasers can be operated at coolant temperatures up to 28 °C (82 °F) in order to reduce problems associated with
condensation; however, this may result in decreased laser performance and/or reduced laser lifetime.
9 Published specications guaranteed at a cooling temperature of 22 °C.

Synrad Firestar f series Specifications

General

Brand	Synrad
Model	Firestar f series
Category	Measuring Instruments
Language	English