Synrad Firestar f series - Figure 5 European Compliance Mark; Table 3 European Union Directives (F201)

laser safety
13
Synrad Firestar f-Series operator’s manual
Agency compliance
Table 3 European Union Directives (f201)
Applicable Standards / Norms
2004/108/EC Electromagnetic Compatibility Directive
2006/95/EC Low Voltage Directive
2011/65/EU RoHS Directive
EN 61010-1:2001 Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use - Part 1: General Requirements
CISPR 11:2003-03 Conducted and Radiated Emissions Group 2, Class A
EN 61326:1997+A1:1998+A2:2001 Electromagnetic Compatibility Requirements
IEC 1000-4-2:1995 Electrostatic Discharge Immunity
IEC 1000-4-3:1995 RF Electromagnetic Fields Immunity
IEC 1000-4-4:1995 Electrical Fast Transient/Burst Immunity
IEC 1000-4-6:1996 Conducted RF Disturbances Immunity
After a laser or laser processing system has met the requirements of all applicable EU Directives, the prod-
uct can bear the ocial compliance mark of the European Union as shown in Figure 5 and a Declaration
of Conformity is provided for the compliant component.
Figure 5 European compliance mark
RoHS compliance
SYNRAD Firestar f-Series lasers meet the requirements of the European Parliament and Council Directive
2011/65/EU on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic
Equipment that establishes maximum concentration values for certain hazardous substances in electrical
and electronic equipment.