Synrad Firestar f series - Page 137

index
i5
Synrad Firestar f-Series operator’s manual
f200/f400, 3-24
K
Keyswitch 8, 11 1-2, 2-3, 2-5, 2-7, 2-8,
2-10, 4-12, 4-13, 4-14, 4-16
Keyswitch functions
integrating, 3-26–3-27
L
Label locations
f100, 4
f200, 5
f201, 6
f400, 7
Lase indicator 8, 11, 2-3, 2-5, 2-8, 2-11,
3-6, 3-11, 3-18, 4-9, 4-10, 4-11, 4-14,
4-15, 4-16, 4-17
Laser Active output 3-11, 4-9, 4-10, 4-11,
4-14, 4-15, 4-16, 4-17
signal description, 3-11, 3-18
Laser aperture 2-2, 2-4, 3-4
Laser faults
indicators, 4-12
resetting, 4-12–4-14
Laser Institute of America 3
Laser Ready output 3-12, 3-26, 3-27, 4-9,
4-10, 4-11, 4-14, 4-15, 4-16, 4-17
signal description, 3-12, 3-18
Laser Safety Handbook 3
Laser safety information 1–13
Laser tube 3-2
Lens cleaning 4-3–4-5, 4-18
Lift handles 1-4, 1-5
removing, 1-5
M
Maintenance 4-2–4-5
cleaning optical components, 4-3–4-5
daily inspections, 4-2–4-3
disabling Firestar, 4-2
storage/shipping, 4-3
Marking/engraving operation 3-10
Material Safety Data Sheets (MSDS) 2, 4-4
Model numbers 1-2
Modulation 3-6–3-8
Mounting 1-10–1-14
f100/f200, 1-10–1-11
from above, 1-10–1-11
from below, 1-11
f201/f400, 1-12–1-14
from above, 1-12–1-13
from below, 1-13–1-14
Mounting bolts 1-7, 1-9, 1-11, 1-13, 1-14
Multiple PLC driven inputs 3-21
N
Normal operating condition 3
O
Occupational Safety and Health Administration
(OSHA) Online Technical Manual 3
Operating modes 3-8–3-10
analog current control, 3-8–3-9
analog voltage control, 3-8–3-9
continuous wave (CW), 3-9
external control, 3-8
gated operation, 3-9
marking/engraving operation, 3-10
Operational owchart 4-7
Operator’s manual 1-7, 1-9
Optical accessories mounting 2-2, 2-4
Optical components
cleaning, 4-3–4-5
cleaning materials, 4-4
guidelines, 4-4
Optical resonator 3-2–3-3
Optical setup
delivery optics, 3-4
focusing optics, 3-5
troubleshooting, 4-17–4-19
Other laser faults 4-14–4-17
Outline and mounting drawings 3-36–3-39
Output circuit
equivalent schematic, 3-19
signal descriptions, 3-11–3-12, 3-18