AR 2000 Operator's Manual
15
Safety and EMC Conformity
Specifications
In order to comply with the European Council Directives, 73/23/EEC (LVD) and 89/336/EEC (EMC Directive),
as amended by 93/68/EEC; the AR 2000 has been tested to the following specifications:
Safety
This equipment has been designed to comply with the following standards on safety:
• EN 61010-1:1993
Safety requirements for electrical equipment for measurement, control and laboratory use.
EN 61010-1 Amendment 1, 1995
EN 61010-1 Amendment 2, 1995
• EN 6101-2-010: 1994
Particular requirements for laboratory equipment for the heating of materials.
EN 61010-2-010 Amendment 1, 1996
• UL3101-1 First Edition 1993
IEC 1010-2-010: 1992
• CAN/CSA-C22.2 No.1010-1: 1992
IEC 1010-2-010: 1992
EMC
• EN61326-1: 1997
Electrical equipment for measurement, control and laboratory use.
Incorporating:
EN55011: 1998 Conducted Class B
EN55011: 1998 Radiated Class A
EN6100-3-2: 1995 Harmonic current
EN6100-3-3: 1995 Voltage flicker
EN6100-4-2: 1995 ESD
EN6100-4-3: 1996 Radiated RF
EN6100-4-4: 1995 Fast Transient/Burst
EN6100-4-5: 1995 Surge
EN6100-4-6: 1996 Conducted disturbances
EN6100-4-11: 1994 Voltage dips
• AZ/NZS 2064: 1997
To Next Page
Loading...
Need help?
General
