TA Instruments AR 2000 User Manual

AR 2000 Operator's Manual
40
Removing the Peltier Plate
1. Press the 'Release button' on the control panel
(see Figure 5.7). A flashing green light indicates
that the attachment can be unplugged.
2. Press the Release button again. A continuous
green light indicates that you can remove the
attachment.
3. Remove the attachment from the rheometer. See
Figure 5.8.
NOTE: The release state will stay active for 10 seconds and
then revert to locked.
Le dévérouillage restera actif pendant 10 secondes. A l'issue
de ces 10 secondes la plaque sera vérouillée
automatiquement.
Figure 5.7
Releasing the Attachment
Figure 5.8
Removing the Peltier Plate

TA Instruments AR 2000 Specifications

General

Brand	TA Instruments
Model	AR 2000
Category	Measuring Instruments
Language	English