AR 2000 Operator's Manual
69
5. Connect the Upper Heated Plate adaptor
to the Smart Swap™ socket (see Figure 7.4
to the right).
6. To return the temperature control to
Peltier plate only, remove the adaptor
from the Smart Swap™ socket using the
“Release” button on the instrument
control panel. Remove the Peltier connec-
tor from the adaptor and plug the connec-
tor directly into the Smart Swap™ socket.
WARNING: Do not remove
the heating element
cover.
ATTENTION: N’enlevez
pas la couverture
d’élément de chauffe.
Figure 7.4
Connection of the UHP Adaptor to the Smart Swap™ Socket
To Next Page
Loading...
