4-12
4
DRIVE SYSTEM
DISASSEMBLY AND ASSEMBLY
1. Remove the canopy or the cab.
“Removing the cab”
2. Remove the covers around the tank.
“Removing the covers”
3. Loosen the drain valve (5) to drain the fuel.
• Fuel tank capacity: 73 L
4. Disconnect the electrical wiring from the fuel sender
(3).
5. Disconnect the fuel hoses (8) and (11).
6. Take out the bolts and remove the plate (14).
7. Take out the nuts and remove the bands (7) and (6)
from the tank.
8. Remove the fuel tank (1).
Installing the fuel tank
For installation of the fuel tank, follow the same procedure
as for removal in the reverse order.
To Next Page
Loading...
