Takeuchi TB 250 - Installing the Slew Motor; Removing the Slew Motor; Slew System

4-19
4
SLEW SYSTEM
DISASSEMBLY AND ASSEMBLY
SLEW SYSTEM
Removing the slew motor
1. Slew motor
1. Tilt up the floor frame.
2. Disconnect the hydraulic hoses from the slew motor
(1).
3. Remove the bolts fixing the slew motor.
Bolt: ThreeBond #1324
Bolt: 256 N·m
4. Suspend the slew motor (1), and then remove it.
Slew motor: 50 kg
Installing the slew motor
For installation of the slew motor, follow the same proce-
dure as for removal in the reverse order.

�